LinkRunner AT from NetAlly
£102.00 – £3,300.00 (inc VAT)
The rugged, handheld LinkRunner AT Network Auto-Tester provides the fastest way to solve network connectivity problems and is one of our most popular products. Originally LinkRunner was a Fluke Networks product, and now NetAlly is the new owner.
Powering up in under three seconds, its one-button AutoTest performs your required set of connectivity tests in seconds, enabling you to quickly and accurately identify and solve network problems. With a full colour screen and simple menu structure, the feature set includes the following:
- Verifying signal and link integrity at 10/100/1G over copper or fibre
- Nearest switch information
- TruePower™ Power over Ethernet testing and loading
- 802.1x authentication
- IPv4/IPv6 readiness
- Cable wire-map and cable identification
Model Comparison
LRAT-1000 | LRAT-2000 | |
---|---|---|
Fibre connectivity | No | Yes |
Test PoE 30W loaded | No | Yes |
Performance Test Reflector | No | Yes |
IPv6 support | No | Yes |
Results storage | 10 | 50 |
Battery | AA x 4 | Li-Ion |
There is also a LinkRunner AT 2000 KIT which includes extra accessories: Wireview Cable IDs #2 – #6 and a holster.
LinkRunner AT is a product we always have in stock, for a quotation contact us now on 01677 428700 or email [email protected], alternatively you can see it on NetAlly’s website.
Downloads
Product in Detail
AutoTest
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical network tests in profiles to run every time. Tests include:
- PoE (copper only) class
- Link speed and duplex (actual and advertised)
- RX pair and polarity
- 802.1x authentication
- 802.1x authentication
- Switch name, port, VLAN, model and IP
- DHCP auto-negotiation with subnet and DHCP server addresses
- IPv4 and IPv6 availability
- Ping and TCP port connectivity with lost and min, max and average speed
Nearest switch and VLAN information
Uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port.
Key device and application availability
Instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP port open test to verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP servers are reported.
Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable Identifier and built-in wiremap port.
802.1x authentication
Verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager software configures 802.1x EAP type, downloads certificates and enters passwords.
TruePower™ PoE testing
Quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, AP’s and phones ensures smooth deployment.
IPv4/IPv6 ready
Supports both IPv4 and IPv6.
Link-Live Cloud
This online service allows you to upload results from your LinkSprinter, LinkRunner and AirCheck testers into one place, just sign up here: https://app.link-live.com/signup. Manage, sort and filter your results and easily create reports. For help getting started just visit their Support Page here.
1000/2000
There are two models of the LinkRunner AT, the 1000 and the 2000 – see the DataSheet for the differences.
Related Products
Below are some products you may be interested in.