[skip to main content]

Items in Basket: 0 Total: £0.00

PathView from Apparent Networks

PathView™ by Apparent Networks provides detailed insight into the speed of the complete end-to-end network path, from source-to-destination including hops through third-party networks. Monitor the actual & potential throughput per hop with powerful diagnostics on weak links. 

By experiencing network performance without affecting it, PathView can show you:
   • How much bandwidth you really have & how stable it is
   • Route changes through the network and the impact this has on performance
   • When, by time, date and hop, you are impacted by poor throughput, data loss and slow
      responses
   • The performance by link type against set target metrics

PathView can track all of the above and plot the results through time, some examples are:
Example 1: A graph of stated bandwidth vs actual bandwidth vs utilised bandwidth vs spare capacity.

Example 2: Routes through the network, how they vary and the impact this has on throughput times.

Example 3: How much delay there is on the link and more importantly the point at which the delay occurs - in the picture below we can see its the last hop

Example 4: By setting target metrics by link type the performance of each metric can be plotted.

Click the picture below to view an introduction to PathView video via YouTube:

PathView Highlights:

• PathView troubleshoots the performance issues in your key network links with hop-by-hop analysis from source to destination, even through the cloud and virtual infrastructures
• PathView tracks your carrier’s performance with measurements such as bandwidth, jitter, latency and packet loss
• PathView proactively monitors network performance, Quality of Experience and Service Level Agreements for better customer experience
• PathView allows you to assess by taking a snap shot before and after application or topology changes
• Generates reports to show customers or management that you are meeting your SLAs
• PathView deploys in minutes with single-ended software requiring no agents, configuration changes or end-points
• PathView integrates easily with third-party network management systems via SNMP and SMTP notification

To see the PathView Cloud live demo now - click here.

Read about PathView customers:
How a Fire Department protected their key links to remote sites - click here.
How a University certified paths for visual communications - click here.
How a Customer proved their Carrier was at fault - click here.

To request a trial or more information on PathView contact us now on 0870 770 4525 or email info@fullcontrolnetworks.co.uk